Synchronous motor ME1803 PMSM brushless IP65 8.1kW sin/cos
The ME 1803 motor is a synchronous motor, type PMSM brushless, consuming 150A at a battery voltage of 60V. It is IP65.
Kit Elec Shop offers you the ME1803 engine.
It is a liquid-cooled version of the ME1718 motor.
Its rated power is 8.1 kW for a rated speed of 4000 rpm.
This ME 1803 motor is a brushless motor, so it does not need any maintenance. It is also called PMSM brushless.
It is a three-phase permanent magnet synchronous motor with axial air gap.
The ME1803 motor has an efficiency of 88% for DC voltages between 36V and 60V DC.
It is a 5 pole pair motor (10 magnets).
The continuous current is 150 amps for a voltage of 60V DC.
Its permanent output power is 8.1 kW at 60 VDC.
The maximum speed of the rotor is 5500 rpm.
The winding has xx turns per phase.
Its interphase resistance is between 5.06 and 5.28 milli Ohms.
The inductance between phases measured at 1000 Hz is between 39 and 43.5 micro Henry.
Its mass is 13 kg.
It has a temperature sensor equivalent to KTY84-130 and a sin/cos position encoder.
This ME1803 motor is waterproof and is IP65.
Explanation of the terms CW (ClockWise): clockwise and CCW (Counter ClockWise): counterclockwise.
Data sheet
- Height (mm) :
- 181.5
- Width (mm) :
- 181.5
- Length (mm) :
- 168
- Weight (kg) :
- 16.30
- Voltage (V) :
- 60V DC
- Current (A) :
- 120A DC
- Power (W) :
- 6000
- MAX power (W) :
- Speed (RPM) :
- 4000
- Torque (Nm) :
- 14.3
- Diameter (mm) :
- 7/8 inch shaft
- TARIC or HS code:
- 85015230 MOT sup 7.5kW
- Country:
- Made in China
You will also like the following associated products:
6mm steel support for MOTENERGY motors for kart chassis without roller
- -5%
- Pack
6mm steel support for MOTENERGY motors for kart chassis with roller
- -5%
- Pack
Stainless steel MOTENERGY motor support for 132mm shaft height bench
SEVCON 48V 275A three-phase controller GEN4 4827 size 2 sin/cos
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
- On sale!
- -50%
US 3/8 22mm stainless steel screw pack for fixing MOTENERGY motors
- -5%
- Pack
Synchronous motor ME1719 PMSM brushless IP65 6kW U/V/W
- On sale!
- -20%
- -5%
- Pack
Motorcycle electrification kit 60V-72V-84V 350A ME1803 8kW motor without battery
- -10%
- Pack