- On sale!
- -20%
Synchronous motor ME1719 PMSM brushless IP65 6kW U/V/W
The ME 1719 motor is a synchronous motor, type PMSM brushless, consuming 120A at a battery voltage of 60V. It is IP65.
Kit Elec Shop offers you the ME1719 motor.
Its nominal power is 6 kW for a nominal speed of 4000 rpm.
This ME 1719 motor is a brushless motor, so it doesn't need any maintenance, it is also called PMSM brushless.
It is a three-phase permanent magnet synchronous motor with axial air gap.
The ME1719 motor has an efficiency of 88% for DC voltages between 36V and 60V DC.
It is a 5-pole (10 magnets) motor.
The direct current is 120 amps for a voltage of 60V DC.
Its permanent output power is 6 kW at a voltage of 60 VDC.
The maximum rotor speed is 5500 rpm.
Its resistance between phases is between 5.06 and 5.28 milli Ohms.
The inductance between phases measured at 1000 Hz is between 39 and 43.5 micro Henry.
Its mass is 13 kg.
It has a temperature sensor equivalent to KTY84-130 and a U-V-W hall effect type position encoder.
This ME1719 motor is waterproof and is IP65.
Explanations of the terms CW (ClockWise): clockwise and CCW (Counter ClockWise): counterclockwise.
Data sheet
- Height (mm) :
- 181.5
- Width (mm) :
- 181.5
- Length (mm) :
- 168
- Weight (kg) :
- 13
- Voltage (V) :
- 60V DC
- Current (A) :
- 120A DC
- Power (W) :
- 6000
- Speed (RPM) :
- 4000
- Torque (Nm) :
- 14.3
- Diameter (mm) :
- 7/8 inch shaft
- TARIC or HS code:
- 85015220 MOT inf 7.5kW
- Country:
- Made in China
You will also like the following associated products:
6mm steel support for MOTENERGY motors for kart chassis without roller
- -5%
- Pack
6mm steel support for MOTENERGY motors for kart chassis with roller
- -5%
- Pack
Stainless steel MOTENERGY motor support for 132mm shaft height bench
SEVCON 48V 275A three-phase controller GEN4 4827 size 2 sin/cos
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
SEVCON GEN4 4845 48V 450A controller size 4 A/B and U/V/W new model
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
- On sale!
- -50%
Administration fee for DVTC configuration software for SEVCON GEN4 controllers
US 3/8 22mm stainless steel screw pack for fixing MOTENERGY motors
- -5%
- Pack
SEVCON three-phase controller GEN4 4827 size 2 U-V-W 63V max on promotion
- On sale!
- -59.8%
- -2.5%
- Pack
Vehicle electrification kit 36V-48V 450A ME1719 6kW motor without battery
- -10%
- Pack
- -5%
- Pack
Boat electrification kit 58V max 275A motor ME1719 6kW without battery
- -10%
- Pack
Motorcycle electrification kit 60V-72V-84V 350A ME1719 6kW motor without battery
- -10%
- Pack
Go-kart electrification kit 36V-48V 275A engine ME1719 6kW without battery
- -10%
- Pack
Motorcycle electrification kit 60V-72V-84V 180A ME1719 6kW motor without battery
- -10%
- Pack
Pump electrification kit 36V-48V 275A motor ME1719 6kW without battery
- -10%
- Pack
Vehicle electrification kit 60V-72V-84V 350A ME1719 6kW motor without battery
- -10%
- Pack
Boat electrification kit 24V 450A motor ME1719 3kW without battery
- -10%
- Pack
Test bench electrification kit 24V 450A motor ME1719 3kW without battery
- -10%
- Pack
Motorcycle electrification kit 36V-48V 450A ME1719 6kW motor without battery
- -10%
- Pack
Vehicle electrification kit 36V-48V 275A ME1719 6kW motor without battery
- -10%
- Pack