Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
search
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos
  • Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos

Synchronous motor ME1718 PMSM brushless IP65 6kW sin/cos

5 1
,
5/ 5
€1,099.80 VAT included

€916.50 Tax excl.

The ME 1718 motor is a synchronous motor, type PMSM brushless, consuming 120A at a battery voltage of 60V. It is IP65.

Quantity
within 1-2 weeks

Kit Elec Shop offers you the ME1718 engine.
Its nominal power is 6 kW for a nominal speed of 4000 rpm.
This ME 1718 motor is a brushless motor, so it doesn't need any maintenance, it is also called PMSM brushless.
It is a three-phase permanent magnet synchronous motor with axial air gap.
The ME1718 motor has an efficiency of 88% for DC voltages between 36V and 60V DC.
It is a 5-pole (10 magnets) motor.
The direct current is 120 amps for a voltage of 60V DC.
Its permanent output power is 6 kW at a voltage of 60 VDC.
The maximum rotor speed is 5500 rpm.
The winding has xx turns per phase.
Its resistance between phases is between 5.06 and 5.28 milli Ohms.
The inductance between phases measured at 1000 Hz is between 39 and 43.5 micro Henry.
Its mass is 13 kg.
It has a temperature sensor equivalent to KTY84-130 and a sin/cos type position encoder.
This ME1718 motor is waterproof and is IP65.
Explanations of the terms CW (ClockWise): clockwise and CCW (Counter ClockWise): counterclockwise.

230-ME1718

Data sheet

Height (mm) :
181.5
Width (mm) :
181.5
Length (mm) :
168
Weight (kg) :
13
Voltage (V) :
60V DC
Current (A) :
120A DC
Power (W) :
6000
Speed (RPM) :
4000
Torque (Nm) :
14.3
Diameter (mm) :
7/8 inch shaft
TARIC or HS code:
85015220 MOT inf 7.5kW
Country:
Made in China

Download

ME1719-Dim

Dimensions du moteur synchrone ME1719 PMSM brushless IP65.

Download (127.83KB)

ME1718-ME1719-ME1803-Plot

Measurements on ME1718, ME1719 and ME1803 synchronous motors.

Download (558.25KB)

ME1718-Dyno-2022

72V DC measurements on ME1718 synchronous motor - 2022-01-21.

Download (162.2KB)

You will also like the following associated products:

Comments (0)
No customer reviews for the moment.