Synchronous motor ME1904 (ME1114) brushless PMAC
The ME 1114 motor is a synchronous motor, type PMAC Brushless. Its output power is 10 kW continuous, 24 kW max at 72 V.
Kit Elec Shop offers you the ME 1114 motor
The ME1114 is a brushless motor, so no maintenance also called PMSM or PMAC (Permanent Current Magnet Alternative Current) brushless,
It is a three-phase, star-connected, permanent magnet synchronous motor with axial air gap.
The motor ME1114 has a 92% efficiency for voltages between 24-72 VDC.
It has a sine / cosine position sensor, SIN / COS.
It has two stators with a rotor in the middle.
It is a motor with 4 pairs of poles (8 magnets).
The winding resistance between phases is 0.065 Ohms with 20 turns per phase.
The recommended maximum rotor speed is 5000 rpm.
The input voltages of the three-phase inverter are between 24 V and 72 V DC.
The torque constant is 0.12 Nm per ampere.
The phase inductance is 0.05 mH.
The inertia of the rotor is 45 kg .cm2.
The permanent current of the motor is 125 amps AC (180 amperes DC input to the drive).
The peak current is 420 amps AC for 1 minute (600 amps DC input drive).
The mass is 15.9 kg.
The maximum torque on the motor shaft is 48 ftlb.
The engine is open-cased and fan-cooled.
Data sheet
- Weight (kg) :
- 13.10
- Voltage (V) :
- 24-72 VDC
- MAX speed (RPM) :
- 5000
- TARIC or HS code:
- 85015230 MOT sup 7.5kW
- Country:
- Made in China
You will also like the following associated products:
SEVCON 48V 275A three-phase controller GEN4 4827 size 2 sin/cos
SEVCON three-phase controller GEN4 4845 48V 450A size 4 sin/cos
SEVCON three-phase controller GEN4 4865 48V 650A size 6 sin/cos
SEVCON three-phase controller GEN4 8035 size 4 sin/cos promotion
- On sale!
- -50%
22 teeth HTD 8m 1008 Taper Lock Steel Pulley 30mm wide 22-8M-30-FTL
- -2.5%
- Pack
- -2.5%
- Pack